The XDAndroid Project is no longer active.
This site provides archived information from while the project was under development. Some links may no longer function.
Difference between revisions of "Kernel boot command-line parameters"
Jump to navigation
Jump to search
(Created page with "This page documents some of the '''kernel boot command-line parameters''' that are useful for XDAndroid users. ;board-htcraphael-navi.wake :''0'': ? ;board-htcvogue.panel_type :...") |
(No difference)
|
Revision as of 10:06, 15 November 2010
This page documents some of the kernel boot command-line parameters that are useful for XDAndroid users.
- board-htcraphael-navi.wake
- 0: ?
- board-htcvogue.panel_type
- Panel type used to power the panel off and on.
- 1: Hitachi
- 2: Topoly
- 3: Samsung
- clock-7x00.a11
- ARM11 clock speed in MHz.
- clock-7x00.ahb_div
- Advanced Host Bus divider.
- clock-7x00.mddi
- MDDI clock (e.g. 0xa51 or 0xe2c).
- gsensor_axis
- Maps the hardware accelerometer axes to software.
- htc_hw.force_cdma
- 1: tells the phone to use CDMA. This is useful for the Touch Pro2, which can contain both GSM and CDMA hardware.
- lcd.density
- ?
- mddi.width
- ?
- mddi.height
- ?
- msmsdcc_1bit
- ?
- msmsdcc_fmax
- The maximum frequency (in Hz) used by the SD controller.
- msmsdcc_nopwrsave
- ?
- msmts_calib
- ?
- msmvkeyb_toggle
- off: ?
- north_am_dialing
- 1: tells the RIL to strip "+" characters from phone numbers before dialing them. This is useful with some North American carriers (e.g. Sprint) that do not handle phone numbers containing "+". See also http://wiki.cdg.org/wiki/Plus_Code_Dialing.
- physkeyboard
- fuze
- german_raph
- nordic_raph
- raph
- rhod100_de
- rhod100_fr
- rhod100_it
- rhod100_nordic
- rhod100_uk
- rhod210
- rhod400
- rhod500
- swiss_raph
- tilt2
- pm.debug_mask
- 2: ?
- pm.sleep_mode
- The mode used when the phone is off.
- 0: Power Collapse Suspend
- 1: Power Collapse
- 2: Apps Sleep
- 3: Slow Clock and Wait for Interrupt
- 4: Wait for Interrupt
- pmem.extra
- 1: ?
- ppp.apn
- ?
- ppp.nostart
- 1: disable starting the PPP connection on boot
- ppp.password
- The password used to connect to the network when dialing #777.
- ppp.username
- The username used to connect to the network when dialing #777.
- rel_path
- The path where the kernel should look for other XDAndroid files.
- sensor
- topaz: ?
External links
- http://www.androidonhtc.com/wiki/Boot_Options - similar information